Barbil’s mines run conveyors that need the right belt for the material. Shriram Beltings supplies chevron conveyor belts to plants in Barbil, Odisha, and helps choose the grade, ply rating and cover thickness before quoting.
Barbil’s Industry and Where This Belt Is Used
Barbil and Joda in Keonjhar district sit on some of India’s richest iron ore deposits, with mines, beneficiation and pellet plants, and sponge iron units.
Typical uses of this belt in Barbil’s plants:
- Mines: Wet ore fines and screened material on inclined conveyors.
About the Chevron Conveyor Belt
Chevron belts have moulded V or Y profiles on the top cover that stop loose material from sliding back on inclined conveyors. They are the usual choice for sand, aggregate, wet coal and similar bulk material on moderate slopes. Full specifications are on our Chevron Conveyor Belt page.
Specifications at a Glance
| Profile | V / Y chevron moulded on the top cover |
| Carcass | EP / NN fabric |
| Typical incline | Up to about 30°, depending on the material |
| Supply | Open rolls or made endless |
Other Belts Used by Barbil’s Industry
SAR Grade (Super Abrasion Resistant) Belt · Sidewall Conveyor Belt · Magnetic Separator Belt
Supply to Barbil
- Dispatch: We supply Barbil and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: manufactured under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients in Odisha: Hindalco Industries Ltd, Mideast Integrated Steels Ltd, Swastik Ispat Pvt. Ltd., Pooja Sponge Pvt. Ltd., Jay Jagannath Steel and Power Ltd and others.
- Region: see also conveyor belts in Odisha.
Other Belts We Supply in Barbil
M-24 Conveyor Belt · Heat Resistant Conveyor Belt · Fire Resistant Conveyor Belt · All belts for Barbil →
Chevron Conveyor Belt in Other Cities
Jharsuguda · Angul · Jamshedpur · Raigarh
Frequently Asked Questions
Which chevron conveyor belt is suitable for mines in Barbil?
In mines, this belt is typically used for wet ore fines and screened material on inclined conveyors. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
Can a chevron belt carry bags?
For bags and cartons a rough top belt usually works better. Chevron belts are made for loose bulk material.
What slope can a chevron belt handle?
Usually up to about 30 degrees, depending on the material. For steeper lifts a sidewall belt is used.
Need a Conveyor Belt for Your Plant in Barbil?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
