Shriram Beltings supplies chevron conveyor belts to coal mines and washeries in and around Angul, Odisha. We manufacture rubber conveyor belts at our own factories, so each belt is built for the duty instead of being picked from a trader’s stock.
Angul’s Industry and Where This Belt Is Used
Angul–Talcher is a major industrial belt, with the mines of the Talcher coalfield, an aluminium smelter, a large integrated steel plant and several thermal power stations.
Typical uses of this belt in Angul’s plants:
- Coal mines and washeries: Wet coal on inclined conveyors, especially during the monsoon. (belts for coal mines and washeries)
About the Chevron Conveyor Belt
Chevron belts have moulded V or Y profiles on the top cover that stop loose material from sliding back on inclined conveyors. They are the usual choice for sand, aggregate, wet coal and similar bulk material on moderate slopes. Full specifications are on our Chevron Conveyor Belt page.
Specifications at a Glance
| Profile | V / Y chevron moulded on the top cover |
| Carcass | EP / NN fabric |
| Typical incline | Up to about 30°, depending on the material |
| Supply | Open rolls or made endless |
Other Belts Used by Angul’s Industry
Magnetic Separator Belt · SAR Grade (Super Abrasion Resistant) Belt · Ultra Heat Resistant (UHR) Belt
Supply to Angul
- Dispatch: We supply Angul and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: manufactured under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients in Odisha: Hindalco Industries Ltd, Mideast Integrated Steels Ltd, Swastik Ispat Pvt. Ltd., Pooja Sponge Pvt. Ltd., Jay Jagannath Steel and Power Ltd and others.
- Region: see also conveyor belts in Odisha.
Other Belts We Supply in Angul
M-24 Conveyor Belt · Fire Resistant Conveyor Belt · Heat Resistant Conveyor Belt · All belts for Angul →
Chevron Conveyor Belt in Other Cities
Jharsuguda · Barbil · Jamshedpur · Bokaro
Frequently Asked Questions
Which chevron conveyor belt is suitable for coal mines and washeries in Angul?
In coal mines and washeries, this belt is typically used for wet coal on inclined conveyors, especially during the monsoon. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
Which chevron profile should I choose?
Tell us the material and lump size. Low profiles suit fine material, taller profiles suit bigger lumps.
Can a chevron belt carry bags?
For bags and cartons a rough top belt usually works better. Chevron belts are made for loose bulk material.
Need a Conveyor Belt for Your Plant in Angul?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
