SAR GRADE SUPER ABRASION RESISTANT CONVEYOR BELTS
Solves
Covers wearing out too quickly on sharp, highly abrasive material.
Used in
Iron ore fines, granite, slag, glass cullet, aggregates and quarries.
Key spec
SAR 90 and SAR 110 grades for severe abrasion, cutting and gouging.
Not sure which grade fits? Try the Belt SelectorGet a quote
Super Abrasion Resistant (SAR) Conveyor Belts: SAR 90 & SAR 110 Grades
Built to Resist Wear AND Maximize Conveyor Life.
The Shriram Beltings Super Abrasion Resistant (SAR) Conveyor Belt is designed for industries where conventional conveyor belts wear out too quickly due to severe abrasion, cutting, gouging, and impact. When handling sharp aggregates, crushed minerals, iron ore fines, glass cullet, slag, granite, or other highly abrasive materials, standard conveyor belt grades often lead to frequent replacements, costly downtime, and increased maintenance expenses.
Our SAR Conveyor Belt range is engineered using advanced abrasion-resistant rubber compounds that significantly reduce wear rates and extend operational life. Available in SAR 90 and SAR 110 grades, these belts provide exceptional durability in some of the toughest material handling environments found in mining, quarrying, cement, steel, recycling, and aggregate industries.
Understanding SAR Conveyor Belt Grades
The SAR grade number indicates the maximum abrasion loss measured under international testing standards. A lower abrasion loss value means higher resistance to wear and longer belt life.
| Grade | Maximum Abrasion Loss | Performance Focus | Recommended Applications |
|---|---|---|---|
| SAR 90 | ≤ 90 mm³ | Extreme Abrasion Resistance | Iron Ore Fines, Glass Cullet, Quartz, Mineral Concentrates |
| SAR 110 | ≤ 110 mm³ | High Impact & Cut Resistance | Stone Crushers, Granite Quarries, Coal, Limestone, Slag |
Product Specifications
| Specification | SAR 90 | SAR 110 |
|---|---|---|
| Maximum Abrasion Loss | ≤ 90 mm³ | ≤ 110 mm³ |
| Tensile Strength | > 24 MPa | > 24 MPa |
| Elongation at Break | ≥ 450% | ≥ 400% |
| Carcass Type | EP / NN Fabric | EP / NN Fabric |
| Belt Width | 300 mm to 3200 mm | 300 mm to 3200 mm |
| Edge Type | Cut Edge / Moulded Edge | Cut Edge / Moulded Edge |
Key Features & Benefits
Exceptional Abrasion Resistance
Specially engineered rubber compounds provide significantly lower wear rates compared to conventional conveyor belt grades, resulting in longer service life and reduced replacement frequency.
Outstanding Cut & Gouge Resistance
Designed to withstand sharp-edged materials, heavy rock impacts, and aggressive loading conditions commonly found in mining and crushing operations.
Extended Conveyor Belt Life
The advanced compound formulation helps reduce surface wear, protecting both the rubber covers and internal carcass structure over extended operating periods.
Superior Impact Absorption
The resilient rubber cover absorbs shock loads generated by falling materials, helping protect the belt carcass from damage.
Excellent Flexibility
Maintains flexibility while operating around pulleys and conveyor systems, reducing cracking and improving long-term performance.
Strong Inter-Ply Adhesion
High-adhesion bonding technology minimizes the risk of ply separation, even under heavy loads and high-speed conveyor applications.
Which SAR Grade Should You Choose?
SAR 90 – Ultra Abrasion Resistant
SAR 90 is recommended when the primary challenge is severe surface wear caused by highly abrasive fine materials that continuously grind against the belt surface.
Ideal For:
- Iron Ore Fines
- Quartz
- Glass Cullet
- Crushed Glass
- Mineral Concentrates
- Abrasive Chemicals
- Sinter Plants
- Fine Aggregate Handling
If your belt is losing cover thickness rapidly due to constant abrasion, SAR 90 provides the highest level of wear protection.
SAR 110 – Super Abrasion Resistant
SAR 110 is designed for environments where heavy impacts, cutting, chunking, and gouging are the primary causes of belt failure.
Ideal For:
- Stone Crushers
- Granite Quarries
- Limestone Handling
- Coal Handling Plants
- Aggregate Screening Plants
- Metallurgical Slag
- Foundry Scrap
- Recycling Facilities
If your conveyor belt experiences damage from large, sharp, and heavy materials, SAR 110 is typically the preferred solution.
Industries & Applications
Mining & Mineral Processing
Reliable transportation of iron ore, manganese ore, bauxite, quartz, mineral concentrates, and abrasive mining materials.
Stone Crushing & Quarrying
Designed for granite, basalt, limestone, aggregates, crushed stone, and high-impact quarry operations.
Cement Industry
Suitable for clinker, limestone, gypsum, raw meal, and abrasive cement manufacturing materials.
Steel & Metallurgical Plants
Effective handling of sinter, slag, pellets, metallic ores, and foundry materials.
Glass Manufacturing
Exceptional performance when conveying glass cullet, crushed glass, and abrasive raw materials.
Recycling Industry
Ideal for transporting scrap metal, construction debris, recyclable waste, and industrial materials.
Common Materials Conveyed
- Iron Ore Fines
- Quartz
- Glass Cullet
- Crushed Glass
- Granite
- Limestone
- Coal
- Aggregates
- Mineral Concentrates
- Metallurgical Slag
- Foundry Scrap
- Construction Debris
- Crushed Stone
- Sand & Gravel
Why Choose Shriram Beltings SAR Conveyor Belts?
At Shriram Beltings, we understand that conveyor belt wear directly impacts operating costs and productivity. Our Super Abrasion Resistant Conveyor Belts are manufactured using premium rubber compounds, advanced production technology, and strict quality control standards to deliver maximum wear resistance and dependable performance.
Our Advantages
✔ Available in SAR 90 and SAR 110 grades
✔ Extremely low abrasion loss values
✔ Superior cut, gouge, and impact resistance
✔ High-strength EP and NN fabric reinforcement
✔ Extended belt service life
✔ Reduced maintenance and replacement costs
✔ Custom widths, plies, and cover thicknesses available
✔ Suitable for mining, quarrying, cement, steel, glass, and recycling industries
✔ Expert technical support and application guidance
Need Help Selecting the Right SAR Grade?
Our technical specialists can help determine whether SAR 90 or SAR 110 is the best choice based on your material characteristics, impact conditions, abrasion levels, conveyor design, and operating environment.
Contact Shriram Beltings today for expert consultation, customized specifications, and competitive pricing on Super Abrasion Resistant (SAR) Conveyor Belts.
Why Buy From Shriram Beltings?
Manufacturer & supplier of top-quality conveyor belts – what we commit, we deliver.
We manufacture and supply rubber conveyor belts from our units at Betul (Madhya Pradesh) and Amritsar (Punjab) and our stock depot at Bhiwandi near Mumbai, so you have one accountable partner for grade selection, dispatch and after-sales support.
ISO 9001:2015 Certified
We work under an ISO 9001:2015 certified quality system, so the roll you get next year is as good as the one you got this year.
Ready Stock up to 3200 mm
Popular widths and grades are kept in stock, so breakdown orders can be dispatched quickly. Special sizes, plies and cover thicknesses are made to order.
Right Grade for Your Job
Tell us the material, temperature and conveyor details. We suggest the grade that gives the best life for your money – not simply the costliest one.
Need a Belt? Talk to Us
Call +91 98275 92612 or email info@shrirambeltings.com with your belt size and application. We reply with the price and delivery date.
Product catalogue
Download Our Conveyor Belt Catalogue
All belt grades, cover properties, ratings, the N/N selection chart and an enquiry checklist in one PDF.
