Looking for a chevron conveyor belt supplier in Satna? Shriram Beltings India Pvt. Ltd. is a manufacturer, not a trader, and supplies chevron conveyor belts to cement plants and mines across Madhya Pradesh.
Satna’s Industry and Where This Belt Is Used
Satna and nearby Maihar form one of central India’s biggest cement clusters, built on the limestone deposits of the Vindhya region.
In Satna, the chevron conveyor belt is mainly used in:
- Cement plants: Inclined conveyors carrying crushed limestone and wet additives such as gypsum. (belts for cement plants)
- Mines: Wet ore fines and screened material on inclined conveyors.
About the Chevron Conveyor Belt
Chevron belts have moulded V or Y profiles on the top cover that stop loose material from sliding back on inclined conveyors. They are the usual choice for sand, aggregate, wet coal and similar bulk material on moderate slopes. Full specifications are on our Chevron Conveyor Belt page.
Specifications at a Glance
| Profile | V / Y chevron moulded on the top cover |
| Carcass | EP / NN fabric |
| Typical incline | Up to about 30°, depending on the material |
| Supply | Open rolls or made endless |
Other Belts Used by Satna’s Industry
Ultra Heat Resistant (UHR) Belt · Bucket Elevator Belt · Sidewall Conveyor Belt · SAR Grade (Super Abrasion Resistant) Belt
Supply to Satna
- Dispatch: We supply Satna and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: manufactured under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients in Madhya Pradesh: MBL Infrastructure Ltd, Geomin Industries Pvt. Ltd., Eurobond Industries Pvt. Ltd., Anand Mining Corporation, Vanshika Sugar & Power Industries Ltd and others.
- Region: see also conveyor belts in Madhya Pradesh.
Other Belts We Supply in Satna
M-24 Conveyor Belt · Heat Resistant Conveyor Belt · Fire Resistant Conveyor Belt · All belts for Satna →
Chevron Conveyor Belt in Other Cities
Indore · Katni · Singrauli · Chhindwara
Frequently Asked Questions
Which chevron conveyor belt is suitable for cement plants in Satna?
In cement plants, this belt is typically used for inclined conveyors carrying crushed limestone and wet additives such as gypsum. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
Which chevron profile should I choose?
Tell us the material and lump size. Low profiles suit fine material, taller profiles suit bigger lumps.
Can a chevron belt carry bags?
For bags and cartons a rough top belt usually works better. Chevron belts are made for loose bulk material.
Need a Conveyor Belt for Your Plant in Satna?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
