Shriram Beltings supplies chevron conveyor belts to mines, cement plants and stone crushers in and around Katni, Madhya Pradesh. We manufacture rubber conveyor belts at our own factories, so each belt is built for the duty instead of being picked from a trader’s stock.
Katni’s Industry and Where This Belt Is Used
Katni is known for its limestone. The district has limestone and mineral mines, lime kilns, crushing units and cement plants nearby.
Where chevron conveyor belts work in Katni:
- Mines: Wet ore fines and screened material on inclined conveyors.
- Cement plants: Inclined conveyors carrying crushed limestone and wet additives such as gypsum. (belts for cement plants)
- Stone crushers: Sand, grit and aggregate on inclined stockpile conveyors.
About the Chevron Conveyor Belt
Chevron belts have moulded V or Y profiles on the top cover that stop loose material from sliding back on inclined conveyors. They are the usual choice for sand, aggregate, wet coal and similar bulk material on moderate slopes. Full specifications are on our Chevron Conveyor Belt page.
Specifications at a Glance
| Profile | V / Y chevron moulded on the top cover |
| Carcass | EP / NN fabric |
| Typical incline | Up to about 30°, depending on the material |
| Supply | Open rolls or made endless |
Other Belts Used by Katni’s Industry
SAR Grade (Super Abrasion Resistant) Belt · Sidewall Conveyor Belt · Ultra Heat Resistant (UHR) Belt · Bucket Elevator Belt · Endless Conveyor Belt
Supply to Katni
- Dispatch: We supply Katni and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: manufactured under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients near Katni: Anand Mining Corporation.
- Other clients in Madhya Pradesh: Geomin Industries Pvt. Ltd., Eurobond Industries Pvt. Ltd., MBL Infrastructure Ltd, Vanshika Sugar & Power Industries Ltd and others.
- Region: see also conveyor belts in Madhya Pradesh.
Other Belts We Supply in Katni
M-24 Conveyor Belt · Heat Resistant Conveyor Belt · Fire Resistant Conveyor Belt · All belts for Katni →
Chevron Conveyor Belt in Other Cities
Indore · Satna · Singrauli · Chhindwara
Frequently Asked Questions
Which chevron conveyor belt is suitable for mines in Katni?
In mines, this belt is typically used for wet ore fines and screened material on inclined conveyors. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
What slope can a chevron belt handle?
Usually up to about 30 degrees, depending on the material. For steeper lifts a sidewall belt is used.
Which chevron profile should I choose?
Tell us the material and lump size. Low profiles suit fine material, taller profiles suit bigger lumps.
Need a Conveyor Belt for Your Plant in Katni?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
