Looking for a M-24 conveyor belt supplier in Aurangabad? Shriram Beltings India Pvt. Ltd. is a manufacturer, not a trader, and supplies M-24 conveyor belts to sugar mills across Maharashtra.
Aurangabad’s Industry and Where This Belt Is Used
Aurangabad (Chhatrapati Sambhajinagar) has large MIDC areas at Waluj and Shendra, and sugar factories and grain processing units across the Marathwada region.
Typical uses of this belt in Aurangabad’s plants:
- Sugar mills: Bagasse conveyors to the boilers and the bagasse yard.
About the M-24 Grade Rubber Conveyor Belt
M-24 is the general purpose grade for heavy, sharp and abrasive material such as stone, ore, limestone and coal at normal temperature. The cover resists cuts and gouging, and the EP or NN fabric carcass carries the load on long and short conveyors alike. Full specifications are on our M-24 Grade Rubber Conveyor Belt page.
Specifications at a Glance
| Cover grade | M-24 (IS 1891 Part 1) |
| Carcass | EP / NN fabric, multi-ply |
| Best for | Heavy, sharp and abrasive material at normal temperature |
| Supply | Open rolls or made endless |
Other Belts Used by Aurangabad’s Industry
Rough Top Conveyor Belt · Bucket Elevator Belt · Food Grade Rubber Conveyor Belt
Supply to Aurangabad
- Dispatch: We supply Aurangabad and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: manufactured under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients in Maharashtra: Pashwa Food International, Sona Alloys Pvt. Ltd., Team Ferro Alloys Pvt. Ltd., B S Ispat Ltd, Mohit Ispat Ltd and others.
Other Belts We Supply in Aurangabad
Chevron Conveyor Belt · All belts for Aurangabad →
M-24 Conveyor Belt in Other Cities
Nagpur · Chandrapur · Kolhapur · Ramagundam
Frequently Asked Questions
Which M-24 conveyor belt is suitable for sugar mills in Aurangabad?
In sugar mills, this belt is typically used for bagasse conveyors to the boilers and the bagasse yard. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
Is M-24 or N-17 better for a stone crusher?
M-24. It has higher tensile strength and better resistance to cuts from sharp stone than N-17.
Can an M-24 belt carry hot material?
No. For hot material choose a heat resistant (T1/T2/T3) belt, and for cement clinker the ultra heat resistant (UHR) grade.
Need a Conveyor Belt for Your Plant in Aurangabad?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
