Looking for a M-24 conveyor belt supplier in Morbi? Shriram Beltings India Pvt. Ltd. is a manufacturer, not a trader, and supplies M-24 conveyor belts to ceramic tile factories across Gujarat.
Morbi’s Industry and Where This Belt Is Used
Morbi is India’s ceramic tile capital, with hundreds of tile, sanitaryware and ceramic units.
In Morbi, the M-24 conveyor belt is mainly used in:
- Ceramic tile factories: Clay, feldspar and quartz from storage to the ball mills.
About the M-24 Grade Rubber Conveyor Belt
M-24 is the general purpose grade for heavy, sharp and abrasive material such as stone, ore, limestone and coal at normal temperature. The cover resists cuts and gouging, and the EP or NN fabric carcass carries the load on long and short conveyors alike. Full specifications are on our M-24 Grade Rubber Conveyor Belt page.
Specifications at a Glance
| Cover grade | M-24 (IS 1891 Part 1) |
| Carcass | EP / NN fabric, multi-ply |
| Best for | Heavy, sharp and abrasive material at normal temperature |
| Supply | Open rolls or made endless |
Other Belts Used by Morbi’s Industry
Supply to Morbi
- Dispatch: We supply Morbi and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: manufactured under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients in Gujarat: Essar Power Hazira Ltd (now AM/NS), Nilkanth Concast Pvt. Ltd., Welspun Metallics Ltd, Alkyl Amines Chemicals Ltd, Shree Renuka Sugars Ltd and others.
- Region: see also conveyor belts in Gujarat.
Other Belts We Supply in Morbi
Chevron Conveyor Belt · All belts for Morbi →
M-24 Conveyor Belt in Other Cities
Bharuch · Gandhidham · Udaipur · Belagavi
Frequently Asked Questions
Which M-24 conveyor belt is suitable for ceramic tile factories in Morbi?
In ceramic tile factories, this belt is typically used for clay, feldspar and quartz from storage to the ball mills. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
Is M-24 or N-17 better for a stone crusher?
M-24. It has higher tensile strength and better resistance to cuts from sharp stone than N-17.
Can an M-24 belt carry hot material?
No. For hot material choose a heat resistant (T1/T2/T3) belt, and for cement clinker the ultra heat resistant (UHR) grade.
Need a Conveyor Belt for Your Plant in Morbi?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
