Shriram Beltings supplies M-24 conveyor belts to mines, steel plants, pellet plants and sponge iron plants in and around Ballari, Karnataka. As a conveyor belt manufacturer and supplier, we match each belt to the material and conveyor before we quote.
Ballari’s Industry and Where This Belt Is Used
Ballari is known for iron ore mining, and the Toranagallu area has one of India’s largest integrated steel plants along with pellet and sponge iron units.
In Ballari, the M-24 conveyor belt is mainly used in:
- Mines: Run-of-mine ore from the primary crusher, screening plants and stockpiles.
- Steel plants: Iron ore, limestone, dolomite and coal in the raw material handling yard.
- Pellet plants: Iron ore fines and additives feeding the grinding and balling sections.
- Sponge iron plants: Iron ore, coal and dolomite feeding the kiln feed bins. (belts for sponge iron plants)
About the M-24 Grade Rubber Conveyor Belt
M-24 is the general purpose grade for heavy, sharp and abrasive material such as stone, ore, limestone and coal at normal temperature. The cover resists cuts and gouging, and the EP or NN fabric carcass carries the load on long and short conveyors alike. Full specifications are on our M-24 Grade Rubber Conveyor Belt page.
Specifications at a Glance
| Cover grade | M-24 (IS 1891 Part 1) |
| Carcass | EP / NN fabric, multi-ply |
| Best for | Heavy, sharp and abrasive material at normal temperature |
| Supply | Open rolls or made endless |
Other Belts Used by Ballari’s Industry
SAR Grade (Super Abrasion Resistant) Belt · Sidewall Conveyor Belt · Magnetic Separator Belt · Ultra Heat Resistant (UHR) Belt
Supply to Ballari
- Dispatch: We supply Ballari and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: supplied under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients near Ballari: Janki Corp Ltd.
- Other clients in Karnataka: Xindia Steels Ltd, Kamachi Industries Ltd, Kalburgi Cement Pvt. Ltd., Bharathi Rock Products (India) Pvt. Ltd. and others.
- Region: see also conveyor belts in Karnataka.
Other Belts We Supply in Ballari
Heat Resistant Conveyor Belt · Chevron Conveyor Belt · Fire Resistant Conveyor Belt · All belts for Ballari →
M-24 Conveyor Belt in Other Cities
Kalaburagi · Belagavi · Bharuch · Durgapur
Frequently Asked Questions
Which M-24 conveyor belt is suitable for mines in Ballari?
In mines, this belt is typically used for run-of-mine ore from the primary crusher, screening plants and stockpiles. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
What details do you need to quote an M-24 belt?
Belt width, rating or number of plies, top and bottom cover thickness, length and the material conveyed. A photo of the old belt marking also helps.
Is M-24 or N-17 better for a stone crusher?
M-24. It has higher tensile strength and better resistance to cuts from sharp stone than N-17.
Need a Conveyor Belt for Your Plant in Ballari?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
