Kalaburagi’s cement plants and mines run conveyors that need the right belt for the material. Shriram Beltings supplies M-24 conveyor belts to plants in Kalaburagi, Karnataka, and helps choose the grade, ply rating and cover thickness before quoting.
Kalaburagi’s Industry and Where This Belt Is Used
Kalaburagi district, especially the Sedam–Chittapur belt, is one of South India’s major cement clusters, built on the region’s limestone.
In Kalaburagi, the M-24 conveyor belt is mainly used in:
- Cement plants: Crushed limestone from the mine crusher to the stacker and reclaimer, and additives such as gypsum and laterite to the mill hoppers. (belts for cement plants)
- Mines: Run-of-mine ore from the primary crusher, screening plants and stockpiles.
About the M-24 Grade Rubber Conveyor Belt
M-24 is the general purpose grade for heavy, sharp and abrasive material such as stone, ore, limestone and coal at normal temperature. The cover resists cuts and gouging, and the EP or NN fabric carcass carries the load on long and short conveyors alike. Full specifications are on our M-24 Grade Rubber Conveyor Belt page.
Specifications at a Glance
| Cover grade | M-24 (IS 1891 Part 1) |
| Carcass | EP / NN fabric, multi-ply |
| Best for | Heavy, sharp and abrasive material at normal temperature |
| Supply | Open rolls or made endless |
Other Belts Used by Kalaburagi’s Industry
Ultra Heat Resistant (UHR) Belt · Bucket Elevator Belt · Sidewall Conveyor Belt · SAR Grade (Super Abrasion Resistant) Belt
Supply to Kalaburagi
- Dispatch: We supply Kalaburagi and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: supplied under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients near Kalaburagi: Kalburgi Cement Pvt. Ltd. and Shree Renuka Sugars Ltd.
- Other clients in Karnataka: Bharathi Rock Products (India) Pvt. Ltd., Janki Corp Ltd, Xindia Steels Ltd and others.
- Region: see also conveyor belts in Karnataka.
Other Belts We Supply in Kalaburagi
Chevron Conveyor Belt · Heat Resistant Conveyor Belt · Fire Resistant Conveyor Belt · All belts for Kalaburagi →
M-24 Conveyor Belt in Other Cities
Ballari · Belagavi · Durgapur · Dhanbad
Frequently Asked Questions
Which M-24 conveyor belt is suitable for cement plants in Kalaburagi?
In cement plants, this belt is typically used for crushed limestone from the mine crusher to the stacker and reclaimer, and additives such as gypsum and laterite to the mill hoppers. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
Is M-24 or N-17 better for a stone crusher?
M-24. It has higher tensile strength and better resistance to cuts from sharp stone than N-17.
Can an M-24 belt carry hot material?
No. For hot material choose a heat resistant (T1/T2/T3) belt, and for cement clinker the ultra heat resistant (UHR) grade.
Need a Conveyor Belt for Your Plant in Kalaburagi?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
