Shriram Beltings supplies chevron conveyor belts to mines, marble and stone units and stone crushers in and around Udaipur, Rajasthan. As a conveyor belt manufacturer and supplier, we match each belt to the material and conveyor before we quote.
Udaipur’s Industry and Where This Belt Is Used
The Udaipur region has lead-zinc and rock phosphate mines, marble processing units and stone crushers.
Typical uses of this belt in Udaipur’s plants:
- Mines: Wet ore fines and screened material on inclined conveyors.
- Marble and stone units: Marble chips and powder on inclined conveyors.
- Stone crushers: Sand, grit and aggregate on inclined stockpile conveyors.
About the Chevron Conveyor Belt
Chevron belts have moulded V or Y profiles on the top cover that stop loose material from sliding back on inclined conveyors. They are the usual choice for sand, aggregate, wet coal and similar bulk material on moderate slopes. Full specifications are on our Chevron Conveyor Belt page.
Specifications at a Glance
| Profile | V / Y chevron moulded on the top cover |
| Carcass | EP / NN fabric |
| Typical incline | Up to about 30°, depending on the material |
| Supply | Open rolls or made endless |
Other Belts Used by Udaipur’s Industry
SAR Grade (Super Abrasion Resistant) Belt · Sidewall Conveyor Belt · Endless Conveyor Belt
Supply to Udaipur
- Dispatch: We supply Udaipur and every other part of India from whichever of our three locations suits the order best: our factories at Betul (Madhya Pradesh) and Amritsar (Punjab), and our depot at Bhiwandi (near Mumbai).
- Selection help: share the material, lump size, temperature and conveyor details, and our technical team will recommend the grade, ply rating and cover thickness.
- Quality: supplied under our ISO 9001:2015 quality system; test certificate available with the supply.
- Clients near Udaipur: Indian Phosphate Ltd, Adheesha Phosphate Ltd and Premsakhi Fertilizers Ltd.
- Other clients in Rajasthan: Tedco Granited Ltd (Bhilwara) and others.
- Region: see also conveyor belts in Rajasthan.
Other Belts We Supply in Udaipur
M-24 Conveyor Belt · All belts for Udaipur →
Chevron Conveyor Belt in Other Cities
Chittorgarh · Gandhidham · Morbi · Bharuch
Frequently Asked Questions
Which chevron conveyor belt is suitable for mines in Udaipur?
In mines, this belt is typically used for wet ore fines and screened material on inclined conveyors. The exact grade, ply rating and cover thickness depend on your material, lump size and temperature. Send us these details and we will recommend the right build.
What slope can a chevron belt handle?
Usually up to about 30 degrees, depending on the material. For steeper lifts a sidewall belt is used.
Which chevron profile should I choose?
Tell us the material and lump size. Low profiles suit fine material, taller profiles suit bigger lumps.
Need a Conveyor Belt for Your Plant in Udaipur?
Send us these details and our technical team will recommend the right belt and send a quote:
- Belt width
- Belt rating (EP / NN) and number of plies
- Top and bottom cover thickness
- Length required (open roll or made endless)
- Material handled and lump size
- Material temperature, if the material is hot
Not sure of the specification? Fill our conveyor belt questionnaire or check the belt selection chart.
Call +91 98275 92612 / +91 90395 92612 Email info@shrirambeltings.com Enquiry form
Helpful guides: installation guide · troubleshooting · belt rating chart · belt weight calculator · jointing process
