M24 GRADE RUBBER CONVEYOR BELT
General Purpose Conveyor Belts,M-24 Grade Rubber Conveyor Belt
We offer Wide range of Grade M-24 Conveyor Belts suitable for conveying normal temperature material maximum up to 60 Degree, it is constructed with fabric (Carcass) and rubber Compound, rubber cover is compounded from the best quality Natural rubber which provides superior resistance to cutting and gouging to Load Support and convey different type and size of material, from short to long distance and light to heavy load transportation of materials.
These belts are mainly used in all the process industries to carry different materials such as
Fertilizer Plants -Super phosphate in lump and powder),
Cement Plants-limestone, Clay slacked lime, sand,Cold clinker
Steel & Power Plant -Coal,Coke, ashes and crushed metallic ores
Stone Crushing Industries -Granite & Blue metal,Crushed stone.
Biomass Power Plant -biomass fuels, wood chips, paper bales, gravel, sized coke,
Glass Industries-timber crushed glass, granite, all types of slacks, sandstones, chipping, quartz, stackers and reclaimers.
|
COVER GRADE CHARACTERISTICS AND APPLICATION |
PHYSICAL PROPERTIES |
|||||||
|
General Purpose Belting |
Standard |
Before Ageing |
After Ageing | |||||
|
Tensile Strength |
Elongation % |
Tempe- |
Duration |
Change Tensile Strength |
Change |
Maximum Abrasion Loss |
||
|
GRADE M-24 |
||||||||
|
This Grade is recommended for conveying heavy, sharp, highly abrasive materials like metallic ores, granite, lime stone, coal, Blast furnace slag & clinker etc. |
IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102 |
24 |
450 |
70 |
72 |
+10-20 |
+10-25 |
150 |
|
GRADE N-17 |
||||||||
|
Recommended for conveying less severe and moderately abrasive material like sized coal, ash, chalk, bauxite etc. |
IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102 |
17 |
400 |
70 |
72 |
+10-20 |
+10-25 |
150 |
|
GRADE N-17 SYNTHETIC |
||||||||
|
Composed of Synthetic Rubber mainly, this grade is suitable for arduous application as M-24 and has similar wear resistance properties. |
IS 1891 PART-I |
17 |
400 |
70 |
72 |
+10-20 |
+10-25 |
150 |
INTERNATIONAL GRADES & STANDARDS FOR GENERAL PURPOSE :
|
Standard & Grade |
Minimum Tensile Strength (Mpa) |
Minimum Elongation at |
Maximum Abrasion Loss (mm³) |
|
DIN-X |
25 |
450 |
120 |
|
AS-M |
24 |
450 |
125 |
|
IS -M24 |
24 |
450 |
150 |
|
BS -M24 |
24 |
450 |
150 |
|
SANS - M |
24 |
450 |
120 |
|
SANS - N |
20 |
400 |
150 |
|
DIN - Y |
20 |
400 |
150 |
|
AS - N |
17 |
400 |
200 |
|
1S -N17 |
17 |
400 |
200 |
|
BS - N17 |
17 |
400 |
150 |
|
RMA 1 |
17 |
450 |
150 |
|
JIS -S |
18 |
450 |
200 |