Menu

SHRIRAM BELTINGS LLP

LARGEST INVENTORY  

Belt Jointing Solutions - Cold Vulcanizing Cement

We are distributors and suppliers of different types of rubber conveyor belt joining solution cement made by renowned manufacturers known for premium quality and durability , We offer Belt Jointing Solution for M-24 Grade Rubber Conveyor Belts, Heat Resistant rubber Conveyor Belts,SAR Grade,Fire Resistant Belts, Pulley Lagging,Tank Lining etc. 

Vulcanizing Process  :

(1) Clean Belt Surface - Buff the surface remove all dust, oil, moisture, grease etc.

(2) Stir / Shakewell solution / cement before use and mix hardner 100 : 6 uniformly in solution.

(3) Apply by brush the mixture of solution compound

(4) Apply the first coat of the HARDNER mix solution and let it dry completely.

(5) Now apply second thin coat and let it dry 15-20 Minutes , support the bonded area with solid wooden ply or m.s. plate.  

(6) Now bring both surfaces together.

(7) Hammer hard with a wooden hammer, ensure  air bubble is trapped jointing area.

(6) Now the jointed belt is ready for service operation after an hour of rest.

(7) The entire process of the cold vulcanizing method should be carried out within 4 - 6 hours and should be carried out by a specialist.

PULLEY LAGGING and TANK LINING are also done by same process. This method of cold vulcanizing / bonding is simple, quick, safe and economical.

HEAT RESISTANT GRADE APPLIED FOR CONVEYOR JOINT IS FOLLOWED BY THE SIMILAR METHOD AS ABOVE.